Audi TT 2007 Workshop Manual page 29

Hide thumbs Also See for TT 2007:

Table of Contents

Audi TT 2007 ➤

Direct shift gearbox 02E, front-wheel drive - Edition 12.2006

Brake light switch -F-

Fitting location: the brake light switch -arrow- is located on pedal

cluster.

♦ Is checked via self-diagnosis

Removing and installing brake light switch ⇒ Rep. Gr. 46

Note

To ensure a secure fit, the switch may only be fitted once.

Kickdown switch -F8-

An adapted value from accelerator position sender -G79- and ac‐

celerator position sender 2 -G185- (integrated in accelerator ped‐

al module) is stored in the engine control unit as the kickdown

signal.

♦ Is checked via self-diagnosis

♦ Signal is transmitted from engine control unit to gearbox con‐

trol unit via CAN bus.

Removing and installing accelerator pedal module ⇒ Rep. Gr.

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not

permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability

with respect to the correctness of information in this document. Copyright by AUDI AG.

Table of Contents