Audi TT 2007 Workshop Manual page 51

Hide thumbs Also See for TT 2007:

Table of Contents

– Set up support bracket -10 - 222 A- on body flanges using the

following equipment:

♦ Rack -10 - 222 A /1- (2x)

♦ Adapter -10 - 222 A /4-

♦ Connecting piece -T40091/3- (2x)

– Attach adapters -T40093/3-2- (left-side) and -T40093/3-3-

(right-side) to supports -T40093/3- .

– Disconnect earth wire from longitudinal member (left-side).

– Remove securing bolt for front section of longitudinal member

(both sides).

– Bolt adapters -arrow- to longitudinal members, using bolts re‐

moved previously.

Note

Illustration shows left side of vehicle.

– Insert square bars -T40091/1- with connecting pieces -

T40093/4- into connecting pieces -T40091/3- and supports -

T40093/3- as illustrated.

Direct shift gearbox 02E, front-wheel drive - Edition 12.2006

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not

permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability

with respect to the correctness of information in this document. Copyright by AUDI AG.

Audi TT 2007 ➤

4. Removing gearbox

Table of Contents