Planmeca Viso User Manual page 82

12 3D quality control
78 Planmeca Viso
5. Click the QA button.
6. Select the test type Planmeca QA from the options.
7. Click the Start button to continue.
Planmeca QA tests consists of the following test:
• QA 3D - C-Arm Center
• QA 3D - Middle Arm Center
• QA 3D - Middle Arm Offset
8. Select the QA 3D - C-Arm Center from the calibration task list (if not yet
selected) and click the Start button.
User's manual