Taking 2D Exposure; Panoramic Exposure - Planmeca Viso User Manual

10 2D exposure

10.6 Taking 2D exposure

10.6.1 2D Panoramic exposure
Before you begin
About this task
Steps
44 Planmeca Viso
3. Select the green check mark button.
Make sure that you have selected the correct patient in the Planmeca
Romexis program.
Follow these steps to take a 2D Panoramic exposure.
1. Select the forward button.
Green lights flash on the control panel and exposure button when the
X-ray system is getting ready for an exposure. You see this message.
NOTE
Move to a protected area.
User's manual