Control Panel - Planmeca Viso User Manual

8 Main parts

8.6 Control panel

Making selections
20 Planmeca Viso
You can use the control panel from:
1. The touch screen that is part of the X-ray unit
2. The virtual control panel that is integrated into the Planmeca Romexis
program
The virtual control panel is shown on the computer screen when you
have selected the patient and the exposure mode in Planmeca Romexis.
The two control panels are synchronised, and you can use either or both of
them. Note, however, that the height adjusting slider cannot be used on the
virtual control panel (2).
NOTE
The options shown on the screen depend on the X-ray unit configuration.
The views and values shown in this manual are only examples.
NOTE
The X-ray unit can be upgraded with new programs and features. Contact
your dealer for further information.
NOTE
Never allow patients to touch the screen when they are positioned in the X-
ray unit. Touching the screen during exposure will stop the imaging process.
To make a selection on the touch screen, simply touch a button or a field
with your finger or a soft stylus.
You hear an audible signal when you make a selection.
NOTE
Do not use sharp objects to operate the touch screen.
To make a selection on the virtual control panel in the Planmeca Romexis
program, simply click your mouse on the function that you wish to use.
The selected option is highlighted. To deselect an option, select the button
or field again (or select another option if available).
User's manual