Planmeca Viso User Manual page 12

5 Safety precautions
8 Planmeca Viso
CAUTION
Do not modify the X-ray unit. The X-ray unit must be serviced by qualified
personnel only.
CAUTION
Be careful that the X-ray unit does not hit the ceiling when you move the
X-ray unit up. The maximum height can be adjusted to suit offices with a low
ceiling. Contact your service technician for help.
CAUTION
Make sure that there is no object under the X-ray unit when you move the
X-ray unit down. If something is in danger of becoming trapped, release
the height adjusting slider immediately to stop the movement. Clear any
obstruction before moving the X-ray unit again.
CAUTION
Portable RF communications equipment (including peripherals such as
antenna cables and external antennas) should be used no closer than 30
cm (12 inches) to any part of the X-ray unit, including cables specified by the
manufacturer. Otherwise, degradation of the performance of this equipment
could result.
User's manual