M&C PSS Series Instruction Manual page 15

Install the sample gas tubes and the condensate tube as follows:
1. Remove the union nut from the clamping ring tube fittings by turning it anti-clockwise. The nut should be
removed from the thread with great care so as to ensure that the loose sealing ring in the nut is not lost.
2. Place the union nut over the connecting tube.
3. Place the sealing ring over the connecting tube with the thicker bead towards the nut.
4. Place the tube over the nipple on the thread.
N O T E !
5. Tighten the union nut hand-tight.
The tube will no longer be able to slip off and is now compression-proof.
Disassemble the tubes in reverse order.
W A R N I N G !
www.mc-techgroup.com
The tightness of the connections can only be guaranteed if the
connecting tube has a straight rim (hose cutter).
Aggressive condensate is possible.
Wear protective glasses and proper protective clothing!
PSS-10 | 1.00.02 15