Supply Connections; Tube Connections; Figure 3 Medium Connections - M&C PSS Series Instruction Manual

12

SUPPLY CONNECTIONS

12.1

TUBE CONNECTIONS

N O T E !
Figure 3 shows the possible medium connections. These are located in the right-hand side of the gas
conditioning case at the rear in a specially immersed assembly frame.
Figure 3 Medium connections
All hose connections are equipped with 4/6 mm sealing ring threaded hose couplings made of polypropylene
(PP) for gas input temperatures of up to a maximum of 80 °C [176 °F] (see figure 3). If heated sample lines are
used, whereby the gas input temperatures are increased up to a maximum of 180 °C [356 °F], additional
bulkhead unions made of stainless steel are recommended.
Connecting tubes of dimension 4/6 mm are used as standard.
14
Do not switch tube connections; connections are marked accordingly.
After all lines have been connected, the tightness must be checked.
Power
supply
Sample gas
OUT
Condensate
OUT
PSS-10 | 1.00.02
Sample gas
IN
www.mc-techgroup.com