Safety Instructions; Warranty - M&C PSS Series Instruction Manual

Portable gas conditioning unit
Hide thumbs Also See for PSS Series:
Table of Contents

Advertisement

3

SAFETY INSTRUCTIONS

Please take care of the following basic safety procedures when mounting, starting up or operating this
equipment:
Read this operating manual before starting up and use of the equipment. The information and warnings given in
this operating manual must be heeded.
Any work on electrical equipment is only to be carried out by trained specialists as per the regulations currently in
force.
Attention must be paid to the requirements of VDE 0100 (IEC 364) when setting high-power electrical units with
nominal voltages of up to 1000 V, together with the associated standards and stipulations.
Check the details on the type plate to ensure that the equipment is connected to the correct mains voltage.
Protection against touching dangerously high electrical voltages:
Before opening the equipment, it must be switched off and hold no voltages. This also applies to any external
control circuits that are connected.
The device is only to be used within the permitted range of temperatures and pressures.
Check that the location is weather-protected. It should not be subject to either sun, direct rain or moisture.
Do not use the gas conditioning system PSS-10/1 in hazardous areas.
Installation, maintenance, inspections and any repairs of the devices must be carried out only by qualified skilled
personnel in compliance with the current regulations.
4

WARRANTY

In case of a device failure, please contact immediately M&C or your M&C authorized distributor.
We have a warranty period of 12 months from the delivery date. The warranty covers only appropriately used
products and does not cover the consumable parts. Please find the complete warranty conditions in our terms
and conditions.
The warranty includes a free-of-charge repair in our production facility or the free replacement of the device. If
you return a device to M&C, please be sure that it is properly packaged and shipped with protective packaging.
The repaired or replaced device will be shipped free of delivery charges to the point of use.
www.mc-techgroup.com
PSS-10 | 1.00.02
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pss-10/1

Table of Contents