5.2.3
T
UNNEL
If enabled, once the temperature reaches the Tunnel Set Point, Trio turns on the tunnel fans and
opens the tunnel doors. As in Basic Ventilation, you define the fans to be used in each level.
However, there is no curve between levels.
Even if Extra Ventilation is enabled, Trio will go straight to tunnel mode if the temperature is above
•
the Tunnel Set Point (skipping over Extra Ventilation).
You can set a differential for each level to ensure that ventilation increases only when required.
•
In this example, tunnel fans are at level T6.
Refer to Tunnel Ventilation, page 49 for more details.
Refer to Defining the Wind Chill Factor, page 51 for details on factoring in the wind chill factor in tunnel
mode.
V
ENTILATION
© Munters AB, 2020
26