3.1.1 T
C
EMPERATURE
Define:
•
o Temperature Curve Offset: Adjusts all temperature curves by this amount. You can use
this to temporarily adjust all temperatures up or down for special circumstances. The
curve appears in the
Down combinations to change the offset.
o Set Temperature Change Reminder (Diff): Sets the change in set temperature that
triggers a reminder for you to set backup thermostats. Often producers forget to set
backup thermostats as their birds grow from baby chicks to market age, so the Platinum
Touch / Rotem One reminds you. When you press Enter to acknowledge the reminder,
the Platinum Touch / Rotem One logs it in the Table of Events.
NOTE
'0' disables this parameter (if value is changed an appropriate message is displayed).
3.2 Minimum Vent Timer
This option enables the user to set the minimum ventilation timing.
Does Minimum Ventilation Work?
•
9 8 B H
S etting up Minimum Ventilation
•
9 9 B
Ramping Timer Help | Set
•
Additional Details
•
3.2.1
H
D
M
OW
OES
INIMUM
9 8 B
Ventilation time in the Platinum Touch / Rotem One runs in two modes:
Minimum ventilation (MV): Fans run in an on/off cycle, where the cycle time changes as the
•
temperature changes. Change in the cycle time only happens after a user-defined delay. Since
temperatures can fluctuate constantly, the delay ensures stable fan speeds.
Continual operation: Fans remain on until the temperature drops
•
Figure 2 illustrates the ventilation modes.
H
| S
D
URVE
ELP
ET
EFINITIONS
Curve Status Hot
V
W
ENTILATION
© Munters AB, 2018
Screen. Use the ENTER and Up or ENTER and
?
ORK
14