Ampoule Panels; Cylinder Clamp Straps - Weinmann ULM CASE III Description And Instructions For Use

4.5 Ampoule Panels

4.6 Cylinder Clamp Straps

10
EN Use
The "ampoule panels WM 8771"
cessories, can be fitted as required in the top of the
case simply by fitting the case top dividers in the ap-
propriate position.
The position of the ampoule strips on the ampoule
panels can also be changed by loosening the fixings
and relocating the ampoule strips as desired.
To fit 0.8 l or 2.0 l oxygen cylinders in the base of the
case, use the accessory "WM 15141 – set of 2 clamp
straps for oxygen cylinders"
ted in the oxygen cylinder recess as shown. To secure
a 2.0 l cylinder, use the outer clamps. The centre and
left-hand clamps are used for an 0.8 l cylinder.
Ensure that the straps are tight to prevent the
cylinder from slipping during transport.
, available as ac-
30
. The cylinders are fit-
27