Edit An Item - Leviton EZ-MAX User Manual

Event - EVT:
This action item is used to enable or disable an event

Edit an Item:

Once items have been added to an action, they can be edited. If you are still in the
Add An Action Section:
Z-Max Advanced Programming & Systems Design Guide
Revision A:11/2005
Be sure that you do not create a continuous loop by linking to action
items that eventually link back to the original
ADDING
ACT undefined...
Press once to position the cursor in the Action field
Step 58:
The default value is Undefined meaning no action has been selected!
Press and
Step 59:
Press Clear to return to "undefined" once a number has been selected
Press Select/Save.
Step 60:
The menu will be returned to the point where another item can be
added, edited, or deleted if desired.
ADDING
EVT 001 DISABLED
Press once to position the cursor in the Event Number field
Step 61:
Press and
Step 62:
the number directly from the keypad.
Press once to position the cursor in the Enable/Disable field
Step 63:
Press and
Step 64:
Press Select/Save.
Step 65:
The menu will be returned to the point where another item can be
added, edited, or deleted if desired.
Press until you get to the Edit An Action Screen
Step 66:
Press Select/Save
Step 67:
Press and
Step 68:
Press Select/Save
Step 69:
Press until you get to Edit An Item Screen
Step 70:
Press until you get to the item you want to edit
Step 71:
Press Select/Save
Step 72:
Edit the item using the same instructions that you used to create the
Step 73:
item
When you are complete with the editing, Press Select/Save
Step 74:
The menu will be returned to the point where another item can be
added, edited, or deleted if desired.
NEW ITEM
until you get to the desired Action.
NEW ITEM
until you get to the desired Event number or enter
to toggle between ENABLE and DISABLE
to choose the action the item is in
Action Editor
rac00-sdg
Page 87