Leviton EZ-MAX User Manual page 96

Page 86
Press
Step 44:
or enter the number directly from the keypad.
A value of zero indicates a local input. A nonzero number indicates an
input on another networked cabinet
Press
Step 45:
Press
Step 46:
number directly from the keypad.
Press Select/Save.
Step 47:
The menu will be returned to the point where another item can be
added, edited, or deleted if desired.
Photocell - PHO:
This action item is used to enable or disable a photo cell.
ADDING
PHO 000 DISABLED
Press
Step 48:
Press
Step 49:
enter the number directly from the keypad.
Press
Step 50:
Press
Step 51:
Press Select/Save.
Step 52:
The menu will be returned to the point where another item can be
added, edited, or deleted if desired.
Occupancy sensor - OCC:
This action item is used to enable or disable an occupancy sensor.
ADDING
OCC 000 DISABLED
Press
Step 53:
Press
Step 54:
enter the number directly from the keypad.
Press
Step 55:
Press
Step 56:
Press Select/Save.
Step 57:
The menu will be returned to the point where another item can be
added, edited, or deleted if desired.
Action - ACT:
An action item can call another action item. This menu allows you to set this up.
and until you get to the desired Button source number
once to position the cursor in the Button Number field
until you get to the desired Button number or enter the
NEW ITEM
once to position the cursor in the Photocell Number field
and until you get to the desired Photocell number or
once to position the cursor in the Enable/Disable field
and to toggle between ENABLE and DISABLE
NEW ITEM
once to position the cursor in the Occupancy Number field
and until you get to the desired Occupancy number or
once to position the cursor in the Enable/Disable field
and to toggle between ENABLE and DISABLE