Leviton EZ-MAX User Manual page 85

discrete input. The only difference is the way they are wired to the system and how
they are networked over Luma-Net. Set up is very similar in philosophy.
For information about inputs which are available for use as a digital switch input, See
"Switch Numbering" on page 69.
To set up a digital switch:
Z-Max Advanced Programming & Systems Design Guide
Revision A:11/2005
Press the Menu Button
Step 1:
Press until you get to the Configuration Screen
Step 2:
Press Select/Save
Step 3:
Press until you get to the Discrete Inputs Screen
Step 4:
Press Select /Save
Step 5:
Press until you get to the Define Types Screen
Step 6:
Press Select /Save
Step 7:
Press until the flashing field reads 49 or greater (this depends on
Step 8:
which switch you are trying to set up)
You can also type in the 3 digit number of the switch. Therefore if
you are trying to set up 49, type 049 from the keypad.
Press Select/Save
Step 9:
The Cursor will jump to the type field and if still at factory default
Step 10:
values, will be flashing SWT as Shown:
SET INPUT TYPES
049:SWT Act HIGH
Press until SWT is in the field
Step 11:
Press . once to position the cursor in the next field
Step 12:
Press until Act HIGH is in the field
Step 13:
Press Select/Save to store the settings and move you to the next
Step 14:
screen
SET NETWORK: ecl
ADD:
Press. once to position the cursor in the field marked ADD. This is
Step 15:
the Luma-Net network address of the digital switch you are
programming.
Press until you get to the desired network address
Step 16:
Press . once to position the cursor in the field marked BT. This
Step 17:
refers to the physical button number on the station itself.
Press until you get to the desired button
Step 18:
Press Select/Save
Step 19:
Switch/Discrete Inputs Assign Actions to Inputs
X BT: X
rac00-sdg
Page 75