To Temporarily Change A Relays State Using Its Override Switch; To Lock Out A Relay Using Its Override Switch; To Unlock A Relay Using Its Override Switch - Leviton EZ-MAX User Manual

Page 62
• Local override of individual relay without having to go through the Control Module
• Temporary - Any control input with a higher priority can change its state
• Locked Out - Event scheduler and control inputs, regardless of Priority will not
be able to alter its state

To temporarily change a relays state using its override Switch:

Open the cabinet door using the supplied key
Step 1:
Press the switch next to the relay you wish to change
Step 2:
The relay will audibly click when it changes states (ON to OFF and vice
versa)
There is a green LED above each relay override switch. If the LED is
on, the relay is ON. If the LED is OFF, the relay is OFF.
Press the switch again to turn the relay on and off.
Step 3:
Pressing the individual relay override switch will always clear higher
priority overrides for the relay. This allows manual control of the relay
even when Emergency or Master Override is active

To lock out a relay using its override switch:

Open the cabinet door using the supplied key
Step 1:
Get the relay to the state that you want to Lock it in. For example, if you
Step 2:
wish to lock the relay in the On state and it is Off, press the switch one
time to toggle the relay to the On state.
Press and hold the Switch for approximately 5 seconds until the LED
Step 3:
beneath the switch begins to blink.
The relay will audibly click when it changes states (ON to OFF and vice
versa)
There is a green LED above each relay override switch. If the LED is
mostly on when it blinks, the relay is locked ON. If the LED is mostly
OFF when it blinks, the relay is locked OFF.

To unlock a relay using its override switch:

Open the cabinet door using the supplied key
Step 1:
Press and release the switch of the relay that is locked out
Step 2:
The relay will change its state from On to Off or vice versa