General Requirements For Connecting Any Device To Low Voltage Inputs - Leviton EZ-MAX User Manual

Input Power Requirements
The relay cabinet has a finite amount of power which it can supply to connected
devices. This topic is discussed in detail starting on page 117 entitled "Power
Considerations for Control Systems."
amount of available peripheral power, or damage to your relay cabinet or connected
devices may occur.
General Requirements for Connecting any Device to Low Voltage
Inputs
Z-Max Advanced Programming & Systems Design Guide
Revision A:11/2005
For ordering information on the polarity IC's and
additional recommendations for active low
inputs, please contact technical services at
(800)959-6004.
Connect leads per wiring diagram as illustrated in the figures on the
Step 1:
following pages
Twist strands of each lead tightly (make sure that there are no stray
Step 2:
strands) and push firmly into appropriate plug connector location.
Tighten the screws on the plug connector—make sure that no bare
Step 3:
conductor is showing.
Plug the connector back onto the control module with the screws facing
Step 4:
the front and the wires coming out of the connector toward the top of
the cabinet.
Low Voltage Control Wiring Control Overview
Please make sure that you do not exceed the
rac00-sdg
Page 157