Command
ACT
AS
BOARD
BYE
COM
CONNECT
DATE
EECLR
EXIT
FD
FDCLR
FT
GC
GRP
Page 104
CLIF Commands
As of the time of printing, the available CLIF commands are listed below. As the
software is constantly evolving, the available commands are changing so the help
menu as discussed above should remain the final authority on CLIF commands.
Syntax/Description
[<actionId>|'?' [parms]] (Set/List/Trigger Action Lists)
AS [<options>|'?'] (Astronomical Clock)
[<'L'|'S'>] (Set/List board type as large or small)
log off and if Tim/Modem/Ethernet shell, hang up modem
Allows for direct communication between the USB port and
the modem or ethernet module
<'baudrate'> connect to modem
Displays Date
Erase the Serial EEPROM chip
Go to the Boot Loader Application.
Initialize to Factory Defaults
Clear Factory Default Flags
FT < A=Auto| M=Manual<1.8> > - Factory Self Test
Get Configuration Data
<grpId> <ON|OFF|BWO|BWC|BWD]|REL|REQ>
[<priority>]