Edit An Event - Leviton EZ-MAX User Manual

Edit an Event

Once an Event has been added, it can be edited.
Z-Max Advanced Programming & Systems Design Guide
Revision A:11/2005
Holiday list. Use
the to move to the next field.
If your system is controlling a building that is
evacuated on holidays, like an office building,
and the event you are scheduling is for interior
lighting then generally you would not include
holiday list(s) in an event. The converse is also
true. If your building is usually occupied on
holidays, you must include the holiday list in the
event. Remember that once a holiday is put into a
holiday list, that day is "removed" from the
general calendar and events will only be triggered
on that day if the holiday list is included with the
event.
Once you are complete with the Holiday Lists, Press Select/Save
Step 11:
Press the
Step 12:
the Event. If you forgot to add an Action, you can select the New Action
List, to add additional Actions
Press Select/Save
Step 13:
Press the
Step 14:
to be a Single event
If single event is set to YES, the event will happen the next time the
event is scheduled for and will be automatically disabled so it only
occurs once. If single event is set to NO, the event will happen every
time the scheduled time is met
12:00am
Single Event=NO
Press Select/Save
Step 15:
Press the
Step 16:
want to occur with this event.
E:001 Act
Sweep Count=000
Press Select/Save
Step 17:
The Menu will bring you back to a point where more Events can be
edited. Press Cancel to take you back to the Main Menu.
Press the Menu Button
Step 1:
Press until you get to the Scheduler Screen
Step 2:
Press Select/Save
Step 3:
and to toggle the Holiday List on or off. Use
and to select the Action you want to associate with
and to toggle between Yes or No for if the event is
New:004
and to set the number of Sweeps, if any, that you
20
Scheduler
rac00-sdg
Page 99