LevelOne ProCon GSW-1291 User Manual page 152

User Manual
logout
Syntax:
logout
Description:
When you enter this command via Telnet connection, you would logout the system
and disconnect. If you connect the system through direct serial port with RS-232
cable, you would logout the system and be back to the initial login prompt when you
run this command.
Argument:
None.
Possible value:
None.
Example:
None.
save start
Syntax:
save start
Description:
To save the current configuration as the start one. When you enter this command,
the CLI would save your current configuration into the non-volatile FLASH. If you
want the configuration still works after rebooting, save the configuration using the
command 'save stat'.
Argument:
None.
Possible value:
None.
Example:
GSW-1291# save start
Saving start...
Save Successfully
GSW-1291#
Publication date: May, 2005
Revision A1
148