LevelOne ProCon GSW-1291 User Manual page 150

User Manual
help
Syntax:
help
Description:
To show available commands.
Some commands are the combination of more than two words. When you enter this
command, the CLI would show the complete commands. Besides, the command
would help you classify the commands between the local commands and the global
ones.
Argument:
None.
Possible value:
None.
Example:
GSW-1291# ip
GSW-1291(ip)# help
Commands available:
------------<< Local commands >>------------
set ip
set dns
enable dhcp
disable dhcp
show
------------<< Global commands >>------------
exit
end
help
history
logout
save start
save user
restore default
restore user
GSW-1291(ip)#
Publication date: May, 2005
Revision A1
Set ip,subnet mask and gateway
Set dns
Enable DHCP, and set dns auto or manual
Disable DHCP
Show IP Configuration
Back to the previous mode
Back to the top mode
Show available commands
Show a list of previously run commands
Logout the system
Save as start config
Save as user config
Restore default config
Restore user config
146