Introduction
Wireless
On / Off
Button
Reboot
or Reset
Rear Panel
Power port
WAN port
(10/100BaseT)
10/100BaseT
LAN connec-
tions
Push button for 3 seconds to Enable or Disable the wireless
signal.
Reboot - Press WPS and Wireless On/Off buttons together
for 5 seconds. The router will restart and boot again.
Reset – Press WPS and Wireless On/Off buttons together for
10 seconds.
All settings will be CLEARED and restored to factory defaults.
Rear Panel
Connect the supplied power adapter here.
Connect the DSL or Cable Modem here. If your modem came
with a cable, use the supplied cable. Otherwise, use a standard
LAN cable.
Use standard LAN cables (RJ45 connectors) to connect your
PCs to these ports.
12