Rear Panel - LevelOne WBR-6000 User Manual

N_One Wireless Broadband Router

Rear Panel

10/100BaseT
LAN connec-
tions
WAN port
(10/100BaseT)
Reset Button
Power port
Figure 3: Rear Panel
Use standard LAN cables (RJ45 connectors) to connect your
PCs to these ports.
Note:
Any LAN port on the Wireless Broadband Router will automati-
cally function as an "Uplink" port when required. Just connect
any port to a normal port on the other hub, using a standard
LAN cable.
Connect the DSL or Cable Modem here. If your modem came
with a cable, use the supplied cable. Otherwise, use a stan-
dard LAN cable.
This button has two (2) functions:
•
Reboot. Press and hold the Reset Button for five (5)
seconds and released, the Wireless Broadband router will
reboot (restart).
•
Clear All Data. This button can also be used to clear ALL
data and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
Power ON, push and hold the reset button for 10 sec.
Release the Reset Button. The Wireless Broadband router will
reboot and now is using the factory default values.
Connect the supplied power adapter here.
8