Wireless - Wireless Distribution System (Wds) - LevelOne NetCon WBR-3408 User Manual

Setup

Wireless - Wireless Distribution System (WDS)

WDS operation as defined by the IEEE802.11 standard has been made available.
Using WDS it is possible to wirelessly connect Access Points, and in doing so
extend a wired infrastructure to locations where cabling is not possible or inefficient
to implement.
For maximum compatibility, it is recommended that WDS be set up using only the
same models, in this case, WBR-3408. Also note that the standard only supports
WEP encryption.
WDS
Enable WDS
MAC Address
List
Wireless Distribution System Screen
This feature allows you to make a completely wireless network
by using multiple access points without connecting them with a
wire LAN.
In order to make the WDS working successfully, the access point
must use the same channel (not Auto), SSID, as well as the
same wireless encryption method.
Enter the MAC address(es) of the AP(s) into the fields to allow
the following access points to be connected to the wireless
router.
32