Wireless Station Configuration; Wireless Configuration On Windows Xp - LevelOne NetCon WBR-3408 User Manual

PC Configuration

Wireless Station Configuration

This section applies to all Wireless stations wishing to use the Wireless Router's
Access Point, regardless of the operating system which is used on the client.
To use the Wireless Access Point in the Wireless Router, each Wireless Station
must have compatible settings, as follows:
Mode
SSID (ESSID)
Wireless
Security

Wireless Configuration on Windows XP

If using Windows XP to configure the Wireless interface on your PC, the configura-
tion procedure is as follows:
1. Open the Network Connections folder. (Start - Settings - Network Connections).
2. Right-click the Wireless Network Connection, check that it is enabled (menu
option says Disable, rather than Enable) and then select View Available Wire-
less Networks.
3. You will then see a list of wireless networks.
The mode must be set to Infrastructure (rather than Ad-hoc)
Access points only operate in Infrastructure mode.
This must match the value used on the Wireless Router.
Note! The SSID is case sensitive.
By default, Wireless security on the Wireless Router is disabled.

If Wireless security remains disabled on the Wireless Router,
all stations must have wireless security disabled.

If Wireless security is enabled on the Wireless Router, each
station must use the same settings as the Wireless Router.
Network Connections (Windows XP)
53