Qos - LevelOne NetCon WBR-3408 User Manual

Advanced Features

QoS

The QoS (Quality of Service) feature allows you specify priorities for different traffic.
Lower priority traffic will be slowed down to allow greater throughput or less delay
for high priority traffic.
An example QoS screen is shown below.
Data - QoS Screen
QoS Setting
QoS Setting
Management
Type
Bandwidth
QoS Screen
To disable QoS (Quality of Service), keep the default setting,
Disable. To enable QoS (Quality of Service), click Enable and
follow these instructions.
There are 2 options:

Rate Control - The QoS will be managed by the size of the
bandwidth.

Priority - The QoS will be managed by the priority.
Note: Rate Control and Priority cannot be used simultaneously.
Enter the desired value of the bandwidth.
For QoS to function properly, the correct value or your Internet
bandwidth is required. Please check with your Service Provider if
you are unsure.
84