Chapter 4 Pc Configuration; Overview; Windows Clients - LevelOne NetCon WBR-3408 User Manual

11g wireless broadband router
Hide thumbs Also See for NetCon WBR-3408:
Table of Contents

Advertisement

Chapter 4
PC Configuration
This Chapter details the PC Configuration required on the local ("Inter-
nal") LAN.

Overview

For each PC, the following may need to be configured:
TCP/IP network settings
Internet Access configuration
Wireless configuration

Windows Clients

This section describes how to configure Windows clients for Internet access via the
Wireless Router.
The first step is to check the PC's TCP/IP settings.
The Wireless Router uses the TCP/IP network protocol for all functions, so it is
essential that the TCP/IP protocol be installed and configured on each PC.
TCP/IP Settings - Overview
If using the default Wireless Router settings, and the default Windows
TCP/IP settings, no changes need to be made.
By default, the Wireless Router will act as a DHCP Server, automatically pro-
viding a suitable IP Address (and related information) to each PC when the PC
boots.
For all non-Server versions of Windows, the default TCP/IP setting is to act as
a DHCP client.
If using a Fixed (specified) IP address, the following changes are
required:
The Gateway must be set to the IP address of the Wireless Router
The DNS should be set to the address provided by your ISP.
If your LAN has a Router, the LAN Administrator must re-
configure the Router itself. Refer to Chapter 8 - Advanced
Setup for details.
40
4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NetCon WBR-3408 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Wbr-3408

Table of Contents