Macintosh Clients - LevelOne NetCon WBR-3408 User Manual

PC Configuration

Click the Setup button.

Select Create Location, and change the location name from "New Locality" to
"Wireless Router".

Click Edit Location. Select TCP/IP for the Network field. (Leave the Phone
Number blank.)

Click Save, then OK.
Configuration is now complete.

Before clicking "Sign On", always ensure that you are using the "Wireless
Router" location.

Macintosh Clients

From your Macintosh, you can access the Internet via the Wireless Router. The
procedure is as follows.
1. Open the TCP/IP Control Panel.
2. Select Ethernet from the Connect via pop-up menu.
3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client
ID field can be left blank.
4. Close the TCP/IP panel, saving your settings.
Note:
If using manually assigned IP addresses instead of DHCP, the required changes
are:

Set the Router Address field to the Wireless Router's IP Address.

Ensure your DNS settings are correct.
51