Working With The Die Separation Tool; Figure 87: Selected Area Has Been Removed - iTero Element 2 User Manual

iTero Element 2 and iTero Element Flex User Manual
Tap to confirm the trimming.
The selected area is removed.

Figure 87: Selected area has been removed

4.3.5

Working with the Die Separation tool

The die separation is created automatically, according to the position of the green hint point, which must be
located on the center of the prepped tooth after scanning.
If required, the die separation area can be edited or created manually.
© 2019 Align Technology, Inc. All rights reserved.
71