Figure 60: Defining The Restoration Properties - iTero Element 2 User Manual

iTero Element 2 and iTero Element Flex User Manual
Select the required treatment option, for example, Crown.
You will be prompted to select the relevant treatment options for your selected dental order.

Figure 60: Defining the restoration properties

Select the following settings from the relevant drop-down lists. Settings marked with an asterisk are
mandatory. Initially, only the material selection is mandatory, but once the material has been selected,
other settings become mandatory depending on the material selected. In addition, the options in each
setting change according to the material selected.
o
Material: The material from which the dental order will be fabricated.
o
Preparation Design: The shape of the finishing line (margin line) created by the user during the
preparation. You must choose this for both the buccal and the lingual.
o
Margin Design: The type of ceramic-metal border relationship required for the selected metal-based
crown. You must choose this for both the buccal and the lingual. This is relevant only for metal dental
work.
o
Shade System: The system used for choosing the shade of the crown.

Incisal: The shade for the incisal area of the crown.

Body: The shade for the body area of the crown.

Gingival: The shade for the gingival area of the crown.
o
Stumpf Shade: The shade of the prepped tooth.
© 2019 Align Technology, Inc. All rights reserved.
53