Installing The Itero Software - Itero Element Flex - iTero Element 2 User Manual

iTero Element 2 and iTero Element Flex User Manual
Installing the iTero software – iTero Element Flex
2.2
New iTero Element 2 systems come with the software installed, but the user must install the software on iTero
Element Flex systems.
Note: Before installing the iTero software on Flex systems, please install all available Windows updates. New
Windows computers should apply the updates automatically.
For proper software installation and configuration of your iTero Element Flex system, please ensure the
following:

The wand is secure in the cradle and connected to the hub

The hub is connected to the laptop

The laptop is plugged into the AC wall socket during the entire software installation
To install the iTero software on an iTero Element Flex system:
Install all available Windows updates.
a. To check for Windows Updates, open the Windows Settings window (Winkey + I) and click Update &
Security
b. Click Windows Update.
c. Click Check for updates to see whether there are new updates available.
In the registered email Inbox, look for the email "Your iTero was shipped", which includes the download
instructions.
Click the link to access the software download page or browse to http://download.itero.com.
On the website, click the Get Started button. The FirstTimeInstaller.exe file will be downloaded.
Run the downloaded installation file and follow the instructions on the screen to complete the iTero
software installation.
The Welcome screen is displayed. Proceed as described in section 2.3, below.
© 2019 Align Technology, Inc. All rights reserved.
13