Scanning The Patient; Figure 61: Treatment Information Area - iTero Element 2 User Manual

iTero Element 2 and iTero Element Flex User Manual
Tap to save your selection and return to the New Scan window.
Your preferences are displayed in the Treatment Information area.

Figure 61: Treatment Information area

You can edit your preferences at any time before sending the scan by tapping
4.2

Scanning the patient

After you have filled in the Rx, tap
enabling you to start scanning the patient.
While scanning, you can perform the following actions:

View additional scan feedback, described in section 4.2.3.1

Toggle between color and monochrome mode, described in section 4.2.3.2
After scanning, you can edit the scan by:

Deleting a segment, as described in section 4.2.4.1

Deleting a selected area, as described in section 4.2.4.2

Capturing areas with missing anatomy, as described in section 4.2.4.3
When you have finished scanning the patient, tap
ensure that your scan is complete before sending it to the lab or storage, as described in section 4.3.
54
iTero Element 2 and iTero Element Flex User Manual
on the toolbar to enter Scan mode. The Scan window is displayed,
on the toolbar to move to View mode, where you can
.
© 2019 Align Technology, Inc. All rights reserved.