Figure 57: New Scan Window - Irecord Case Type - iTero Element 2 User Manual

iTero Element 2 and iTero Element Flex User Manual
o
Restorative: A scan that you need to send to a laboratory for modeling or milling.
 Expanded – 6 teeth are scanned
 Quadrant – 4-6 teeth are scanned for a single crown
 Full arch – all the teeth are scanned
 Reference – no prepped tooth or restoration was selected
The New Scan window is displayed, according to the case type selected.
Figure 57: New Scan window – iRecord case type
Depending on the case type selected, fill in the relevant details.
o
Restorative and Chair Side Milling case types, see section 4.1.1.
iCast: Select the Brackets Present check box if there are brackets on the patient's teeth.
o
o
iRecord:
 Select the Brackets Present check box if there are brackets on the patient's teeth.

Select the Multi-Bite check box if a multi-bite scan is required. This will enable you to preserve
the 2-bite relation based on your needs, and will deliver precise bite information to the lab for
appliance fabrication, for example, sleep apnea appliances.
If your subscription package includes the Final Records option, you will be able to select the treatment
stage. For more information, refer to the Invisalign documentation.
If relevant, from the Send To drop-down list, select the lab to which the scan should be sent.
Tap on the toolbar to move to Scan mode, as described in section 4.2.
50
iTero Element 2 and iTero Element Flex User Manual
© 2019 Align Technology, Inc. All rights reserved.