Working With The Clearance Tool; Figure 80: Deleted Area Marked In Red - iTero Element 2 User Manual

iTero Element 2 and iTero Element Flex User Manual
After adjusting the clearance on the patient's tooth, tap
area, which is marked in red.

Figure 80: Deleted area marked in red

Tap the Clearance tool
4.3.3

Working with the Clearance tool

The Clearance tool
that the prepped tooth has sufficient reduction for the material chosen in the Rx.
The Clearance tool can be accessed from the View mode and from the Viewer, as described in section 4.7.1.
Note: The Clearance tool is displayed only after you have scanned the upper and lower jaws, and the bite.
© 2019 Align Technology, Inc. All rights reserved.
to confirm that the prepped tooth was sufficiently reduced.
enables you to view the contact and distance between the opposing teeth, to ensure
to return to Scan mode and rescan the deleted
67