Electromagnetic Compatibility - NXP Semiconductors NTAG I2C plus Explorer Kit Integration Manual

6. ELECTROMAGNETIC COMPATIBILITY

NTAG I²C plus Explorer Kit fulfils the following requirements of electromagnetic compatibility:
FCC, Part 15.
FCC Compliance Statement
6.5.1.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
residential environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution!
The Federal Communications Commission warns the users that changes or modifications to
the unit not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
SRSt Template 1.0
Doc ID: DOC-XXXXXX
BL ID
Doc Rev 1.00 Approved — 2015.09.01
Project Name: Integration Manual Project ID: 62743
public
Hardware Manual
© NXP B.V. 2015. All rights reserved
16 of 18