Table of Contents
Advertisement
2
2. NTAG I
C plus Explorer Kit OM5569/NT322E: Description
2.1.
Operational desription
To demonstrate the unique properties of the NTAG I
2
I
C plus Explorer Kit OM5569/NT322E which consists from Connected Tags Explorer Board
OM5569 and one NTAG I
2
NXP's NTAG I
C plus Explorer Kit is an all-in-one demonstration/development resource for
NFC connected tags. Designed to emulate using an NTAG I
electronic system, the kit centers around a multi-purpose microprocessor-based
development/Explorer board, and includes a full complement of hardware and software tools
to support investigation of the NTAG I
2
and the I
C serial bus connected link; perform a variety of demonstrations; and develop/test
your own applications.
2
NTAG I
C tag chips mounted on a variety of different antenna types (FR4 PCB-based with
separate antenna pads for custom antenna use, as well as a Flex antenna board based for
easier product insertion testing) and with built-in I
The Connected Tags Explorer board contains an NXP microcontroller (LPC11U24 Cortex-
M0), a RGB (red - green - blue) LED and OBG (orange – blue – green) push button as well
as an NXP temperature sensor (PCT 2075) and an LCD screen to show the messages
coming from the NTAG and the application. NTAG I
I
C intergated circuits (NT3H1101/NT3H1201) and pcb wired (or flex) antenna. Connection
2
between these two boards is via I2C serial link.
The Android application, called NTAG I
the Google Play Store. This document applies to the NTAG I2C Demoboard application
version 1.5 and above. The Android application is intended to operate on devices running
Android version 4.0 and beyond. The application has been optimized for a correct visioning
of the graphical elements in smartphones featuring different resolutions.
The NTAG I
2
C Android App is meant to be working with the Connected Tags Explorer board,
and an adjacent PCB or flex antennas to test all the features and functionalities the NTAG
I
C is offering.
2
USB port and JTAG port are used only for writing firmware into LPC11U24 microcontroller
and for debbuging purposes.
The below picture is a view of the Connected Tags Explorer board and the NTAG I
Antenna Board 54 x 27 mm.
SRSt Template 1.0
Doc ID: DOC-XXXXXX
BL ID
2
C plus Antenna Board OM5569/NT322E (54 x 27 mm ).
2
C chip operation, the NFC RF communication link,
2
C Demo, can be found and freely downloaded from
Doc Rev 1.00 Approved — 2015.09.01
Project Name: Integration Manual Project ID: 62743
C tag chip, NXP developed the NTAG
2
2
C tag chip in an embedded
2
C serial bus interface connectors.
2
C plus Antenna Board contains NTAG
public
Hardware Manual
2
C plus
© NXP B.V. 2015. All rights reserved
5 of 18
Advertisement
Table of Contents
