Table of Contents
Advertisement
5.2.
General functions
Reading/writing to/from NTAG I
-
application.
Explorer Board with NTAG I
-
phone in distance up to 30 mm from the center of the NTAG I
the center of phone NFC antenna.
Data transfer from/to NTAG I
-
NFC phone). Nonmetal material between phone antenna and NTAG I
Board has no influence to reading distance or reading reliability.
Reading/writing to/from NTAG I
-
Tags Explorer Board with NTAG I
android application, called NTAG
can turn on/off LEDs on NTAG I
demonstrate communication with NTAG I
Connected Tags Explorer Board (and see pressed switches on android application).
5.3.
Instructions for safe work, maintaining and care
•
Be careful not to damage the connectors, antenna, PCB, ICs and other connected
parts.
•
Because of the specifics of the device and the damage, only quallified staff, authorized
by the producer, are allowed to repair the device. All interventions of the unauthorized
person and mechanical damage means repealing of the guarantee.
SRSt Template 1.0
Doc ID: DOC-XXXXXX
BL ID
2
C tag ic is possible with NFC mobile phone with android
C plus Antenna Board can communicate with NFC mobile
2
C tag ic is possible in RF electromagnetic field (created from
2
C tag ic is very simple: user approaches his Connected
2
2
C plus Antenna board to NFC phone antenna. The
I2C Demo NFC, must be started on mobile phone. User
I2
2
C plus Explorer Kit (with android application) to
2
C tag ic or can press the switches on
Doc Rev 1.00 Approved — 2015.09.01
Project Name: Integration Manual Project ID: 62743
2
C plus Antenna Board to
public
Hardware Manual
2
C plus Antenna
© NXP B.V. 2015. All rights reserved
15 of 18
Advertisement
Table of Contents
