Mellanox Technologies SwitchX-2 MSX6018F-1SFS Hardware User Manual page 28

18-port qsfp fdr infiniband system

Table of Contents

Rev 1.1

6. During Lightning - Electrical Hazard

7. Copper Cable Connecting/Disconnecting

9. Equipment Installation

10. Equipment Disposal

11. Local and National Electrical Codes

12. Hazardous Radiation Exposure

Mellanox Technologies

Arrow.com.

Downloaded from

During periods of lightning activity, do not work on the equipment or connect or dis-

connect cables.

Copper cables are heavy and not flexible, as such they should be carefully attached to

or detached from the connectors. Refer to the cable manufacturer for special warnings

and instructions.

Rack Mounting and Servicing

When this product is mounted or serviced in a rack, special precautions must be taken

to ensure that the system remains stable. In general you should fill the rack with equip-

ment starting from the bottom to the top.

This equipment should be installed, replaced, or serviced only by trained and qualified

personnel.

Disposal of this equipment should be in accordance to all national laws and regula-

tions.

This equipment should be installed in compliance with local and national electrical

codes.

Caution – Use of controls or adjustment or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

CLASS 1 LASER PRODUCT and reference to the most recent laser standards:

IEC 60 825-1:1993 + A1:1997 + A2:2001 and EN 60825-1:1994+A1:1996+ A2:2001

Installation

Table of Contents