Omron V680S Series User Manual page 94

Section 3
Installation and Connections
 V680S-D2KF67/-D8KF67
Mount the RF Tag with M3 screws.
Tighten the screws to a torque of 0.6 N·m.
Refer to RF Tag Installation Precautions in Section 8 Appendices for information on the effect of metal at the back surface,
Mutual Interference of RF Tags and Influence of Inclination of the V680S-D2KF67.
p.235
Refer to RF Tag Installation Precautions in Section 8 Appendices for information on the effect of metal at the back surface,
Mutual Interference of RF Tags and Influence of Inclination of the V680S-D8KF67.
p.235
You can use the V680S-D8KF67 with Reader/Writers with firmware version 2.00 or higher.
 V680S-D2KF67M/-D8KF67M
Mount the V680-D8KF67M to a metal surface.
Mount the RF Tag with M3 screws.
Tighten the screws to a torque of 0.6 N·m.
Refer to RF Tag Installation Precautions in Section 8 Appendices for information on the effect of surrounding metal, Mutual
Interference of RF Tags and Influence of Inclination on the V680S-D2KF67M.
p.235
Refer to RF Tag Installation Precautions in Section 8 Appendices for information on the effect of surrounding metal, Mutual
Interference of RF Tags and Influence of Inclination on the V680S-D8KF67M.
p.235
You can use the V680S-D8KF67M with Reader/Writers with firmware version 2.00 or higher.
RFID System
92
User's Manual
(PROFINET)
Mounting Hole Dimensions
M3 screw
32
0.2
Marked side
32
Mounting Hole Dimensions
M3 screw
32
0.2
Marked side
32
Two, M3 holes
0.2
Two, M3 holes
0.2