Omron V680S Series User Manual page 44

Section 2
Names and Functions of Components
 Network Settings
You can set the parameters for communications between the Reader/Writer and the host device. If you
change the settings, you must reset the Reader/Writer to enable the new settings.
 IP Address, Subnet Mask, and Default Gateway
You can use any of the following methods to set the IP address, subnet mask, and default gateway for
the Reader/Writer.
 Fixed IP Address Setting
Default setting: 192.168.1.200
 Subnet Mask Setting
Default setting: 255.255.255.0
 Gateway Address Setting
Default setting: 192.168.1.254
 Setting the Web Password
You can set a password for logging in from a Web interface. The password can be up to 15 ASCII
characters. No password is set by default.
If a Web password is set, a dialog box requesting entry of the password will be displayed when the
initial Web server interface is displayed. If the correct password is entered, the normal Web interface
can be used.
RFID System
42
User's Manual
(PROFINET)