Omron V680S Series User Manual page 124

Section 5
Host Communications Specifications
SET RF TAG COMMUNICATIONS
This command sets the RF Tag communications conditions in the Reader/Writer (communications
option, communications speed, and write verification).
 Command Area
CmdCode/Command Code
CmdParam1/Command Parameter 1
CmdParam2/Command Parameter 2
CmdData/Command Data
Communications Option
Communications Speed
Write Verification
Communications Diagnostics
 Response Area
ErrCode/Error Code
RespInfo1/Response Information 1
RespInfo2/Response Information 2
 Execution Example
Setting the Communications Option to Repeat, Setting the Communications Speed to Standard,
Disabling Write Verification, and Enabling Communications Diagnostics
Command Area
Memory offset Data name
+2 CmdCode
+4 CmdParam1
+6 CmdParam2
+8 CmdData[0-1]
+10 CmdData[2-3]
+12 CmdData[4-5]
+14 CmdData[6-7]
RFID System
122
User's Manual
(PROFINET)
Signal/data Data type
WORD
WORD
WORD
WORD
WORD
WORD
WORD
Signal/data Data type
WORD
WORD
WORD
Byte +0 Byte +1
1 0 0 1
0 0 0 0
0 0 0 0
0 0 0 1
0 0 0 1
0 0 0 0
0 0 0 1
Size
2 bytes 1001 hex
2 bytes 0000 hex (Not used.)
0000 hex (Not used.)
2 bytes
0000 hex: Once
2 bytes 0001 hex: Repeat
0002 hex: FIFO Repeat
0000 hex: High speed
2 bytes
0001 hex: Normal speed
0000 hex: Do not verify.
2 bytes
0001 hex: Verify
0000 hex: Disable
2 bytes
0001 hex: Enable
Size
16 bits Error Code
2 bytes 0000 hex (Not used.)
2 bytes 0000 hex (Not used.)
Response Area
Memory offset Data name
+2 ErrCode
+4 RespInfo1
+6 RespInfo2
Function
Function
Byte +0 Byte +1
0 0 0 0
0 0 0 0
0 0 0 0