Omron V680S Series User Manual page 165

Hide thumbs Also See for V680S Series:
Table of Contents

Advertisement

Configuration File
This section describes the format of the configuration file. The configuration file uses a normal INI file
format.
 Any line that starts with a semicolon (;) is treated as a comment.
 Any line that starts with an opening bracket ([) is treated as a section declaration row. The row must
also end in a closing bracket (]).
 Any row that does not start with either of the above two characters is an entry row.
 Section and Entry Table
Section name
NetworkSetting
RFTagCommunicationSetting
MultiReaderWriterSetting
Entry name
IPAddress
Gives the setting of the IP address of the
Reader/Writer. Specify four decimal numbers
separated by periods.
SubnetMask
Gives the setting of the subnet mask of the
Reader/Writer. Specify four decimal numbers
separated by periods.
GatewayAddress
Gives the setting of the default gateway of
the Reader/Writer. Specify four decimal
numbers separated by periods.
DeviceName
Gives the name of the Reader/Writer.
Specify up to 63 ASCII characters.
WebPassword
Gives the login password for the browser
interface. Specify up to 15 ASCII characters.
Specify "" (blank) for no password.
WebPortNo
Gives the Ethernet communications port
number for the browser interface. Specify
1024 to 65535 decimal.
CommunicationSpe
Gives the communications speed between
ed
the Reader/Writer and RF Tags. Set a
decimal number.
0: High speed
1: Normal speed
WriteVerify
Gives the setting for write verification for
write communications. Set a decimal
number.
0: No verification
1: Verification
CommunicationOpti
Gives the setting of the RF Tag
on
communications option. Set a decimal
number.
0: Once
1: Repeat
2: FIFO Repeat
MultiReaderWriterM
Gives the Reader/Writer Extended Mode
ode
settings. Specify a decimal value.
0: Disabled
1: Field Extension Mode
2: High-speed Traveling Mode
SlaveNum
Gives the number of slaves in Field
Extension Mode.
Set a value between 0 and 7.
SlaveNo1IPAddress
Give the IP Addresses in Reader/Writer
Extended Mode.
---
Specify four decimal numbers separated by
SlaveNo7IPAddress
periods.
Browser Interface
Description
192.168.1.200
255.255.255.0
192.168.1.254
7090
0
1
0
0
0
0.0.0.0
Section 6
Default
RFID System
163
User's Manual
(PROFINET)

Advertisement

Table of Contents
loading

This manual is also suitable for:

V680s-hmd63-pntV680s-hmd64-pntV680s-hmd66-pnt

Table of Contents