Omron V680S Series User Manual page 125

GET RF TAG COMMUNICATIONS SETTINGS
This command reads the RF Tags communications conditions from the Reader/Writer
(communications option, communications speed, and write verification).
 Command Area
Signal/data
CmdCode/Command Code
CmdParam1/Command Parameter 1
CmdParam2/Command Parameter 2
 Response Area
Signal/data
ErrCode/Error Code
RespInfo1/Response Information 1
RespInfo2/Response Information 2
RespData/Response Data
Communications Option
Communications Speed
Write Verification
Communications Diagnostics
 Execution Example
Reading the Communications Settings When the Communications Option Is Set to Repeat, the
Communications Speed Is Set to Standard, Write Verification Is Disabled, and Communications
Diagnostics Are Enabled
Command Area
Memory offset Data name Byte +0
+2 CmdCode 1
+4 CmdParam1 0
+6 CmdParam2 0
Data type Size
WORD 2 bytes
WORD 2 bytes
WORD 2 bytes
Data type Size
WORD 2 bytes
WORD 2 bytes
WORD 2 bytes
WORD 2 bytes
WORD 2 bytes
WORD 2 bytes
WORD 2 bytes
Byte +1
0 0 2
0 0 0
0 0 0
Host Communications Specifications
Function
1002 hex
0000 hex (Not used.)
0000 hex (Not used.)
Function
Error code
0000 hex (Not used.)
0000 hex (Not used.)
0000 hex: Once
0001 hex: Repeat
0002 hex: FIFO Repeat
0000 hex: High speed
0001 hex: Normal speed
0000 hex: Do not verify.
0001 hex: Verify
0000 hex: Disable
0001 hex: Enable
Response Area
Memory offset Data name Byte +0
+2 ErrCode 0
+4 RespInfo1 0
+6 RespInfo2 0
+8 RespData[0-1] 0
+10 RespData[2-3] 0
+12 RespData[4-5] 0
+14 RespData[6-7] 0
Section 5
Byte +1
0 0 0
0 0 0
0 0 0
0 0 1
0 0 1
0 0 0
0 0 1
RFID System
123
User's Manual
(PROFINET)