Omron V680S Series User Manual page 132

Section 5
Host Communications Specifications
GET OPERATING TIME
This command reads the operating time since the Reader/Writer was started.
The operating time is reset when the Reader/Writer is reset.
 Command Area
CmdCode/Command Code
CmdParam1/Command Parameter 1
CmdParam2/Command Parameter 2
 Response Area
ErrCode/Error Code
RespInfo1/Response Information 1
RespInfo2/Response Information 2
RespData/Response Data
Operating time
 Execution Example
Reading the Operating Time When It Is 1,234,567,890 (4996 02D2 hex)
Command Area
Memory offset Data name
+2 CmdCode
+4 CmdParam1
+6 CmdParam2
RFID System
130
User's Manual
(PROFINET)
Signal/data Data type
WORD
WORD
WORD
Signal/data Data type
WORD
WORD
WORD
UDINT
Byte +0 Byte +1
2 0 0 2
0 0 0 0
0 0 0 0
Size
2 bytes 2002 hex
2 bytes 0000 hex (Not used.)
2 bytes 0000 hex (Not used.)
Size
2 bytes Error code
2 bytes 0000 hex (Not used.)
2 bytes 0000 hex (Not used.)
Running time since the Reader/Writer was started (in
4 bytes milliseconds)
0000 0000 to FFFF FFFF hex
Response Area
Memory offset Data name
+2 ErrCode
+4 RespInfo1
+6 RespInfo2
+8 RespData[0-1]
+10 RespData[2-3]
Function
Function
Byte +0 Byte +1
0 0 0 0
0 0 0 0
0 0 0 0
4 9 9 6
0 2 D 2