Installing The Propeller - Seagull Models THUNDERBOLT P47G SNAFU 60 ARF Assembly Manual

M3x12mm.
Epoxy.
145mm.
Balsa stick.
Epoxy.
6) Attach the speed control to the side
of the motor box using two-sided tape
and tie wraps. Connect the appropriate
leads from the speed control to the mo-
tor. Make sure the leads will not interfere
with the operation of the motor.
Speed control.
Battery.

INSTALLING THE PROPELLER.

.
The propeller should not touch any
part of the spinner cone. If it does, use a
sharp modeling knife and carefully trim
away the spinner cone where the propel-
ler comes in contact with it.
Tie wraps.
19