Chapter 1: Introduction
System Overview
Figure 1 Main Web EMS Page
Optionally, you can display a representation of the PTP 820 front panel by clicking either the arrow
in the center or the arrow at the right of the bottom toolbar.
Figure 2 Displaying a Representation of the Front Panel
Figure 3 Main Web EMS Page with Representation of Front Panel
When HSB radio protection is enabled, two tabs appear on the top of the main section. These tabs
are labeled Active and Standby and enable you to configure the Active and Standby units
separately if necessary. The title above the main section indicates whether you are working with
the Active or Standby TCC. For details on configuring HSB radio protection, see
Configuring HSB
Radio
Protection.
phn-3963_004v000
Page 1-4