Summary of Contents for Thermo Scientific Eutech Expert CTS
Page 1
Thermo Scienti c ™ i t n c i f ™ Eutech ™ Eutech Expert CTS ™ Expert CTS Speci cations Conductivity Range 0.00 to 20.00 mS 10 µS below 2.00 mS, Resolution 0.10 mS above 2.00 mS Easy-to-read Relative Accuracy ±2 % full scale ±...
Page 2
Operating Instructions For Expert CTS Conditioning Before First Use Menu (To Change Settings) 1. Remove the transparent cap and add 20 mm of tap water (approximately ½ full). To reset the calibration to factory default condition: 2. Recap the Expert CTS tester and soak for at least 15 minutes. 3.