Set Time Value; Audio Mode - Thermo Scientific Eutech EC 1720 User Manual

Press and hold the  key to quickly decrease.
Press the "Enter" key to save the change.

3.2.15 Set Time Value

Set the time in AM/PM hour format.
Press the  or  key to scroll through the Setup
Menu list until the Set Time Value item is shown.
The AM/PM setting will flash. Press the  or  key
to set the AM or PM time format.
Press the "Enter" key to save the change.
The hour value will flash. Press the  or  key to
adjust the hours.
a. Press the  key to increase by one hour.
Press and hold the  key to quickly increase.
b. Press the  key to decrease by one hour.
Press and hold the  key to quickly decrease.
Press the "Enter" key to save the change.
The minutes value will flash. Press the  or  key
to adjust the minutes.
a. Press the  key to increase by one minute.
Press and hold the  key to quickly increase.
b. Press the  key to decrease by one minute.
Press and hold the  key to quickly decrease.
Press the "Enter" key to save the change.
22 Chapter 3 | Setup Menu

3.2.16 Audio Mode

Set the audible beep on or off. The audible beep is used
when an alarm is triggered.
Press the  or  key to scroll through the Setup
Menu list until the Audio Mode item is shown.
Press the  or  key to set the audio mode.
Press the "Enter" key to save the change.