Temperature Compensation Coefficient; Reference Temperature - Thermo Scientific Eutech EC 1720 User Manual

3.2.7 Temperature Compensation
Coefficient
Set temperature compensation off or enter the value of the
linear coefficient value for temperature compensation to
apply a constant percent correction factor to every degree
change in temperature.
To set the temperature compensation off, set the value to
0.0 %/°C.
To set a linear temperature compensation value, enter a
value of 0.0 to 10.0 %/°C.
Press the  or  key to scroll through the Setup
Menu list until the Temperature Compensation
Coefficient item is shown.
Press the  or  key to set the coefficient value.
a. Press the  key to increase the value by 0.01.
Press and hold the  key to quickly increase.
b. Press the  key to decrease the value by 0.01.
Press and hold the  key to quickly decrease.
Press the "Enter" key to save the change.
18 Chapter 3 | Setup Menu

3.2.8 Reference Temperature

Set the reference temperature for temperature
compensation to 15°C, 20°C, 25°C or 30°C.
Press the  or  key to scroll through the Setup
Menu list until the Reference Temperature item is
shown.
Press the  or  key to set the reference
temperature value.
Press the "Enter" key to save the change.