Connecting
5.3 Connecting MASS 2100/FC300
Location of DIP switch
The DIP switch is located in the electronic as shown below.
DIP switch settings for communication set-up
DIP switch Com‐
munication set-
up
EOL active
EOL not active
NOTICE
Avoid DIP switch settings not mentioned in the table
DIP switch settings not mentioned in the table preceding are not allowed and may reduce
communication interface reliability.
48
Switch 1
Switch 2
On
On
On
On
Switch 3
Switch 4
On
On
Off
Off
SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB